HCX (Heavy Cut Compound)

Autoslick HCX – Heavy Cut Compound

HCX Heavy Cut Compound is a high-performance correction compound engineered to remove severe paint defects and restore clarity to heavily neglected finishes. Its professional-grade formula combines aggressive cutting abrasives with advanced fillers, delivering rapid defect removal with a smooth, controlled working experience.

Key Benefits

• Revives Severely Worn Paintwork
  Designed for heavily weathered, oxidised, or poorly maintained vehicles requiring strong correction.
• Ideal Foundation for Refining Stages
  Effectively levels the paint surface, allowing smoother transition into medium and fine polishing steps.
• Consistent, Professional Results
  Cuts hard while finishing clean, leaving a controlled, haze-free surface ready for the next stage.

HCX is engineered to remove deep scratches, oxidation, sanding marks, and heavy swirl damage, restoring clarity and creating a uniform surface ready for final finishing.

Directions of use : 

Hand Application

1. Apply 2–5 small dots of HCX to a clean foam applicator or lint-free microfibre cloth.
2. Using light to moderate pressure, work the compound into the paint in small sections (approximately 50cm x 50cm) using overlapping vertical and horizontal passes.
3. Allow the residue to dry to a light haze.
4. Buff off using a clean, lint-free microfibre cloth.

Machine Application

1. Apply 2–5 small dots of HCX to a light foam polishing pad.
2. Spread the product evenly across the surface using light pressure at the lowest machine speed.
3. Work in small areas (approximately 50cm x 50cm) using overlapping vertical and horizontal passes.
4. Increase machine speed gradually up to 1000 RPM, continuing to work the compound until it turns clear.
5. Allow the compound to dry to a haze.
6. Remove residue with a clean, lint-free microfibre cloth.